- Remove Green pool cover by turning handles on pool cover stand.
- Collect water sample from 20cm below water surface
- Find two test tubes and syringe on water testing bench.
- Rinse each test tube with pool water by filling syringe with pool water. Add half a syringe to each testing tube, shake test tubes and discard water.
Test pH
- Activate PalinTest 9, found on water testing bench. When 'Choose a test' screen comes on press pH button and press 'Ok'. Palin Test 9 will ask you to Insert blank (ie a test tube without a testing tablet added, just pool water).
- Add 10mLs of water sample test tube and insert into Palin Test 9 with diamond on test tube facing you, perpendicular to palin test 9 screen. Press 'Ok'. Palin Test 9 will ask you to 'Insert Sample'.
- Add 'Phenel Red' test tablet to full test tube. Crush tablet using white crush/stir rods until tablet gone.
- Insert pH sample into Palin Test 9 with diamond on test tube facing you, perpendicular to palin test 9 screen. Press 'Ok'. Note pH Level.
Test Chlorine/Bromine
- Use arrow keys to highlight 'Choose a test' at bottom of screen. Press 'ok'. Press ClF button to select 'Chlorine Free' test. Palin Test 9 will ask you to Insert Sample.
- Add 3mLs of water sample to test tube. Add 'DPD 1' test tablet to test tube. Break DPD 1 tablet using second (clean) white crush/stir rods.
- Add rest of 10mL sample from syringe to DPD 1 test sample and continue to crush DPD 1 tablet until tablet is completely crushed.
- Add Sample into Palin Test 9 with diamond on test tube facing you, perpendicular to palin test 9 screen. Press 'Ok'. Note Chlorine Level.
- Use arrow keys to highlight 'Choose a test' at bottom of screen. Press 'ok'. Press 'Br' button to select 'Bromine test'. Palin Test 9 will ask you to Insert Sample.
- Press 'Ok'. Note Bromine Level.
Enter Results
- Enter results in Pool testing record spreadsheet found in one drive on each computer.
C:UsersToddOneDriveCentral West Health and RehabPool Testing and Maintenance